ALL ABOUT MATERIAL COSMETOLOGY - TYPES OF PROCEDURES

Rejuvenation of facial skin material by phonophoresis

Material cosmetology offers different types of facial treatments. In the photo before and after each procedure, you can see the differences, advantages and disadvantages, as well as take into account the contraindications to the use of different methods of skin rejuvenation. The methods of exposing the devices to the skin are relevant in the 21st century, they have wide prospects, as they combine healing properties with an aesthetic effect.

Advantages of material cosmetology

The cosmetic surgeries that use devices allow the improvement of the plastic features of the face without surgery. Here are some of the benefits of material cosmetology:

  • short recovery period after procedures.
  • the result of rejuvenation after 50 years.
  • can be applied without additional anesthesia.
  • lack of long preparation.
  • simplicity of methods of material influence?
  • skin improvement?
  • application of natural influencing factors known to the body.
  • a small number of contraindications.
  • Electric face massage
  • there are no age restrictions, universal methods.

Physiotherapy uses such effects related to natural processes in the body as muscle stimulation, UVB therapy, electrical stimulation, high and low frequency magnetotherapy, laser radiation and ultrasound. Many of the physiotherapy treatments are used in material cosmetology. Combined with active nutrition and skin hydration and other cosmetic procedures.

With the help of devices, cosmetologists achieve various results - lifting, color correction, treatment of acne and irritation, cleansing and nourishing the skin, tightening the oval of the face. To eliminate some defects, a complex treatment is used with many cosmetology devices with different range of effects.

Fields of application of devices in cosmetology

After 40 years, the skin partially loses its elasticity.Tighten facial skin following material techniquesCreams and care products, even the most advanced, do not penetrate deep into the skin. Cosmetic products can penetrate to a greater depth through material treatment methods. Thus, their area of ​​application increases significantly. The external parameters of the skin are improved, the wilting processes are significantly slowed down.

IMPORTANT: is it possible to achieve a good result at home using cosmetology devices? There are devices for independent use. They are effective, although they have little power and you have to use them for a long enough time to get the expected result.

Mesoporosis (non-invasive mesotherapy), ultrasonic lifting, electrostimulation are widely used to rejuvenate the skin. Electromyostimulation is commonly used to improve the oval and increase muscle tone. Other methods are used to get rid of a wide range of problems. These are, for example, age spots, scars and wrinkles, wide pores, weak tone of the muscles of the face and neck.

How material cosmetology can help:

  • smooth the skin, remove fine wrinkles.
  • smooth out acne scars, smallpox scars and other blemishes.
  • improve skin care, reduce damaged cheeks.
  • Empty face cleansing
  • remove age points.
  • remove unnecessary tattoos.
  • Treat cellulite areas of the body until it disappears.
  • treat the roots and scalp.
  • remove hair on the surface of the face and body.
  • heals vascular capillaries in the skin.
  • remove warts and papillomas.

Contraindications to the use of devices include blood diseases, intolerance to certain substances or influences, certain genetic diseases, oncology, pregnancy. In any case, if you have doubts about whether it is worth using cosmetic procedures, you should consult experts.

Popular cosmetic procedures using material

Cleaning and healing procedures using hardware technology have appeared relatively recently. They are constantly improving, new devices are appearing.Before and after microcurrent treatmentWe offer you a brief overview of the most popular trends in material cosmetology.

Facial treatment with microcurrents

According to research by European experts, stimulating the skin with a weak electric current increases the elastin content in it by 40-50 percent, collagen - by 10-12 percent. As a result of the action of the current in the inner layers of the skin, an accelerated division of cells occurs, an additional supply of nutrients to them due to the improvement of blood flow. The amount of chemicals inside the skin cells increases. There is an increased supply of oxygen. After the procedure, creams and masks are better absorbed. To achieve significant results in improving the skin with the help of microcurrent therapy, it is recommended to complete a complete course of many procedures. But even after the first procedure, there is a significant improvement in skin health indicators.

Massage material

In aesthetic cosmetology, a variety of massage materials are used to improve skin performance, increase tone, get rid of blemishes in the form of folds and cellulite formations. It is also actively used for weight loss and body contouring. This massage, in addition to cosmetic functions, has important healing properties. Before and after the material massageBefore self-massage, the skin is cleansed, the device should be moved along the massage lines, no more than 2-3 minutes in each place.

Avoid touching the device where there are moles, nipples or inflamed areas. The massage machine usually has different settings that can be set to the desired mode. It depends on the area of ​​the body or person affected and for what purpose. Now such types of massage devices as lymphatic drainage, vacuum, vibration, water are popular.

INFORMATION: the combination of massage and physical therapy has led to methods of improving the parameters of the skin using devices. Material cosmetology includes many types of procedures for the face and body, in the photos you can see the skin before and after the treatment, notice the differences, the pros and cons, taking into account the contraindications.

Some indications for cosmetic massage:

  • weak skin tone, leading to sagging cheeks.
  • cramps, muscle spasms
  • presence of wrinkles?
  • swelling?
  • skin stretch?
  • cellulite, overweight.

Contraindications to such massage can be various skin diseases, allergies, metabolic disorders. To be sure of the benefits of material massage procedures, you should consult a doctor and, if necessary, undergo a general examination.

Darsonvalization

Darsonvalization

This method was originally used to stimulate blood circulation and metabolic processes in physiotherapy. Its name comes from the surname of the French physicist and physiotherapist d'Arsonval. High frequency alternating current at high voltage is applied to parts of the body through glass tubes. In cosmetology, this procedure has become popular due to its availability, lack of side effects and simplicity.

The device is small and quite effective not only in beauty salons, but also at home. With this device, you can get rid of acne, pimples, inflammation quickly. It is also possible to keep the skin beautiful by timely treatment of fine wrinkles, enlarged pores, getting rid of excess oil or dryness. Such devices treat spider veins and skin regeneration well. Under the influence of high frequency current, blood circulation increases and metabolic processes in the skin are activated.

Facial muscle stimulation

The process of muscle stimulation can take place both in beauty salons and in aesthetic medicine centers and at home. The device acts on the muscles with a series of electrical pulses (via dermal electrodes). Stimulation muscle contractions by the device can be associated with contractions during maximal physical exercise. This contributes to a significant increase in skin tone and softness. Usually, the following steps are required to use the machine:

Muscle stimulation
  • cleansing the skin of cosmetics.
  • adjust the required duration and intensity.
  • When placing electrodes on the face or body, they should be symmetrical.
  • enable active device operation.
  • move electrodes to the next section.
  • application of cosmetic products for care.

INFORMATION: Muscle stimulators attach to the desired part of the body and do not require manual handling, which allows you to do other things during the procedure or just relax. Most muscle stimulants are powered by batteries. There are some contraindications to their use, so it is recommended that you consult a specialist first before starting to use it.

Microdermabrasion

This is a method of skin rebuilding using abrasives. It is based on the ability of abrasive particles to penetrate the skin and lose the keratinized parts of the skin. Abrasive microparticles have good penetrating properties. The peeling (skin) frees up space for further development of the skin tissue. Currently, the devices use two types of abrasives: diamond powder and aluminum dioxide. After treatment, the remaining abrasive dust is removed using a vacuum.

Cryotherapy

Cryotherapy

This method is based on the body's response to cooling. After a strong short-term drop in temperature, various hormones, including endorphins, adrenaline, are released into the skin and increase immunity and blood supply. Now in beauty salons are applied various types of devices methods of cryotherapy. Some of them are:

  • cryo-spray material: liquid nitrogen (from -180 to -50 degrees) is sprayed through a special device.
  • cryoelectrophoresis: frozen chemicals are injected under the skin through electrical pulses.
  • cold chambers: chambers with cold air and nitrogen (-130 degrees) for the whole body.

Galanotherapy

These devices are based on the use of weak low voltage electrical pulses (40-50mA). Its effect causes an increase in the content of histamine, serotonin and other active ingredients in the subcutaneous layer. In cosmetic technologies, iontophoresis and disinfection devices are used. The first type of device transmits current to the surface of the skin through specialized components. It is used to treat fatigue, acne, pigmentation, the smoothing of facial wrinkles. The second type of appliance is designed for cleaning. Combines the use of alkaline solutions with galvanizing. Relaxing the skin contributes to deep degreasing and getting rid of dead skin scales.

Material peeling performance

Before and after peeling the material

Peeling material, unlike manual peeling, allows you to achieve the result of youth and freshness in less time. Various types of peeling devices cleanse and help nourish all skin levels. The cleansing is deep and involves the cellular level. Devices for other purposes, for example, devices for ultrasound and laser liposuction, operate on the principles of tissue cleansing and stimulation. These methods are used to remove excess weight, fat deposits. Laser exfoliation not only removes the top layer of the skin, but also improves blood circulation and muscle tone when exposed to light waves. Innovative laser reset with fractional lasers, with very deep cleaning, practically does not cause damage.

INFORMATION: The category of procedures in aesthetic medicine, in contrast to the invasive category, is less complicated, more painless and not traumatic in use. It is ideal for those who support minimal interference with the body's natural processes.

There is a material shell for home use. In particular, ultrasonic peeling machines cleanse the skin, remove dead particles, thus stimulating metabolic processes and the growth of new cells. With inflated resources, they help reduce them. The result of the procedure is the increase of the softness of the skin, changing its color to warmer and fresher shades. Also for home appliances, nozzles for mechanical types and vacuum peeling types are common. Ultrasonic peelingMore complex types of peels are done by specialists in salons and aesthetic medicine centers.

Non-surgical rejuvenation has become available with the advent of material cosmetology types. This field of aesthetic medicine constantly offers interesting programs for the care of your appearance. New devices are created, the old ones are improved taking into account the modern technologies. Many devices use a set of multiple types of effects simultaneously: vacuum, ultrasonic, electric. For example, in a method such as lymphatic drainage. The process improves the movement of the lymph, as a result of which the swelling is reduced, the metabolic processes in the body are restored and the blood circulation is increased.

In material cosmetology, types of high-tech devices are used, created specifically for facial procedures, the effectiveness of which is confirmed by many photos before and after application, the advantages of this method far outweigh the disadvantages and there are few contraindications. Traditional beauty care products (creams or masks) in combination with the latest technologies give excellent results and help you look harmonious and youthful.